Page 5 - Tohnichi_CIP

Tohnichi Reference Guide 2019

FOR TIGHTENING If other types of head is requested Selection of Torque Products
In such working condition where resin handles are not suitable
Tightening bolts at a given torque CL QL-MH CL-MH
QL

Interchangeable head version of QL P.12 Metal handle version of QL P.11 Metal handle version of CL P.12
TORQUE
WRENCH Standard model for tightening If tightening at one particular torque only
P.11 If tightening the same bolts at particular torque only
QSP CSP SP2 SP2-MH RSP2 RSP2-MH
FOR INSPECTION
Nominal diameter
M4-M40 Inspecting the torque of tightened bolts Preset version of QL Interchangeable head version of QSP Preset type open end head P.19 Preset type ring head P.19
Nominal diameter DB/CDB P.17 P.18
For calibrating torque wrenches

SF/F/QF/CF CEM3-G/CTB2-G NEW
Standard model for inspection MEASUREMENT 13/8/9 14:00
esc TOH000-A12345 Serial Number CEM100N3X15D Model Name 1 Ch Accuracy (%) 3.0 ClickType
0.0000
Zero Clear Set Torque 20.000 40.000 20.000 40.000 1 20.000 2 44.000 20.000 40.000 3 20.000 40.000 4 N.m 20.000 5 40.000
P.37 MEMORY 60.000 80.000 100.00 60.000 80.000 100.00 60.000 80.000 100.00 60.000 80.000 100.00 63.500 80.000 100.00 60.000 80.000
Beam type P.39 Digital type P.35
FOR TIGHTENING TCC2-G DOTE4-G

Tightening screws at a given torque P.52 P.51
Tightening at one particular torque only
RTD/LTD/AMRD/AMLD RNTD/NTD For daily inspection of torque wrenches

TORQUE
Rotary slip torque screwdriver
TORQUE SCREWDRIVER (Over-torque prevention) P.5 Preset version of RTD P.6
PRODUCTS FOR INSPECTION

Nominal diameter Inspecting the torque of STC2-G G
M1.6-M6 tightened screws LC3-G Line Checker P.54
FTD-S/FTD Other Torque Wrench Testers:

DOT and TF models are also available.
Digital type P.9
Other Torque Measurement
Direct reading type P.9
ST3-G/ TCF/ TCR
P.54 P.58
FOR MEASURING VERY
SMALL TORQUE ATGE-G BTGE-G
Example
Inspecting small torque ranging
from 0.05cN·m-150cN·m CL 100 N × 15D
ATG/BTG Size of interchangeable head

TORQUE GAUGE/ with 3-jaw chuck * Interchangeable head type only
TORQUE METER P.55 Digital type P.55 Digital type P.56 Unit (N = N·m, CN = cN·m, MN = mN·m)

FOR MEASURING CAP Torque range (Maximum torque in S.I. unit)
OPENING TORQUE TME2 Model
Measuring torque for For checking torque on bottle caps,
special products starting torque test, and twisting torque, etc.
TM
Please refer to the "Torque Handbook vol. 8"
for further technical information.
Analog type P.57 Digital type P.57

2